Real estate Vehicles Electronics Machinery Materials IT & software Packaging

Buying used machinery from Europe

In short: Europe has one of the largest installed bases of industrial machinery in the world, and used machines from European workshops are regularly bought by companies in the United States, Canada, the Middle East, Africa and Asia. A successful purchase comes down to five things: inspecting the machine properly from a distance, understanding the technical differences (above all the power supply), agreeing clear Incoterms, organising freight and customs with professionals, and paying in a way that protects you.

This guide is written for buyers outside the European Union, with particular attention to buyers in the United States. It gives a general overview and does not replace advice from a customs broker, an engineer or a lawyer.

Why buy used machinery from Europe

  • Supply: Germany, Austria, Italy, Switzerland and their neighbours are home to many machine builders, and their domestic markets release well-maintained machines when companies upgrade, restructure or close.
  • Documentation: European machines usually come with a type plate, a declaration of conformity, operating manuals and, in many cases, maintenance records, because EU workplace rules require them.
  • Price: a used machine from Europe can cost a fraction of a new one, even after freight and duties. The exchange rate matters, so compare the total landed cost, not the list price.

Step 1: Inspect the machine from a distance

Most international buyers never see the machine before it ships. Make up for that with evidence:

  • Type plate and serial number: ask for a clear photo. It gives you the manufacturer, model, year and serial number for a background check with the manufacturer.
  • Hours and history: operating hours from the control, service history, retrofit records, reasons for sale.
  • Video under power: a short video of the machine running, with the axes, spindle, hydraulics and controls in operation, tells you more than any photo.
  • Third-party inspection: for valuable machines, commission an independent inspector or a service technician of the manufacturer in the seller's region. The fee is small compared to the risk.
  • Software and licences: for CNC machines, check which control version is installed, whether options and licences transfer with the machine, and whether the manufacturer still supports it.

Step 2: Technical differences to check before you buy

Power supply

Industrial machines in Europe are built for 400 V three-phase at 50 Hz; the United States uses 480 V or 208 V at 60 Hz, Canada 600 V in many plants. The consequences:

  • Motors connected directly to the mains run about 20 percent faster at 60 Hz. For pumps, fans, conveyors and spindles with direct drives this changes speeds and loads; a frequency converter or a step-down transformer with a frequency converter solves it.
  • A transformer alone changes the voltage, not the frequency. Ask the seller or the manufacturer whether the machine is specified for 60 Hz operation.
  • Control voltages (24 V DC) and most modern drives with inverters are usually unaffected, but the rating of the incoming transformer and the main switch must be checked.

Conformity and workplace rules

The CE marking confirms conformity with European directives. It is not recognised as such in the United States. Whether a used machine can be put into service depends on federal and state workplace rules (OSHA) and on your insurer and local authority, who may ask for a field evaluation by a nationally recognised testing laboratory and for compliance with NFPA 79 for the electrical equipment. Budget for guarding, emergency-stop circuits and labelling to be checked after arrival. In Canada, provincial electrical codes apply.

Units, language and software

Controls and documentation are often in German or Italian; many controls can be switched to English. Dimensions and threads are metric. Ask whether the English manual is available.

Step 3: Price, Incoterms and who does what

A European seller's price is usually quoted "ex works" (EXW) or "free carrier" (FCA). The difference matters for the export declaration:

IncotermSeller doesBuyer does
EXWmakes the machine available at the workseverything else, including the EU export declaration, which non-EU buyers cannot easily file themselves
FCAloads the machine and clears it for exportmain carriage, insurance, import
CIF / CFRfreight to the destination port, insurance (CIF)import clearance, duties, onward transport
DAPdelivery to the agreed placeimport clearance and duties

For machinery, FCA is usually the practical choice: the seller, who is in the EU, handles the export declaration, and your freight forwarder takes over from there. Agree in writing who dismantles, drains fluids, crates and loads the machine, and whether the seller's rigging costs are included.

Step 4: Freight and packaging

  • Mode: small machines travel in a standard container, large ones on a flat rack or open-top container, in break-bulk or, for wheeled equipment, by roll-on roll-off vessel. Air freight is possible for small, urgent items.
  • Packaging: machines should be sea-worthy packed, usually with corrosion protection and a sealed foil. Wood packaging entering the United States, Canada and most other countries must be heat-treated and marked under ISPM 15, otherwise the shipment can be refused.
  • Insurance: take out transport insurance for the full value; carrier liability is limited.
  • Timing: ocean freight from a European port to the US East Coast typically takes a few weeks door to door including handling; plan for customs and inland transport on top.

Step 5: Customs and duties

  • Classification: your customs broker classifies the machine under the Harmonized Tariff Schedule, mostly in chapter 84 (machinery) or 85 (electrical equipment). The duty rate depends on the heading; many machine tools carry low general rates, but additional tariffs on goods from the European Union may apply depending on current trade measures. Check the current rate before you buy, not after.
  • Documents: commercial invoice, packing list, bill of lading or air waybill, the EU export declaration from the seller's side and, where required, the importer security filing before the vessel loads.
  • Used goods: there is no general prohibition on importing used industrial machinery into the United States. Engines and vehicles are different: they are subject to EPA and DOT rules, and cars generally need to be 25 years old to be imported without conformity, so check these categories separately.
  • VAT: goods exported from the European Union are exempt from EU VAT when the seller can prove that they left the EU. If the seller charges VAT because you collect the goods yourself, clarify the refund procedure beforehand.

Step 6: Paying safely

  • Pay only after you have a written contract or confirmed order with machine, serial number, price, Incoterm, delivery date and condition.
  • For larger amounts, bank transfer in instalments against milestones (order, loading, documents) or a letter of credit are common. Keep the payment traceable and in the name of the contracting company.
  • On Vermittco, direct purchases are paid online via Stripe, and where the seller has activated buyer protection, the payout is held until you confirm receipt or 14 days have passed since delivery or dispatch. For machinery, an inquiry with an individually agreed contract is the usual route; business sellers are verified and show their company details on their dealer page.
  • Never pay to an account that does not belong to the seller's company, and never through a payment link received by email or chat. The guide Safe online trading lists the warning signs.

Checklist before you buy

  • Type plate photo, serial number, year, hours, video under power
  • Inspection report or manufacturer confirmation
  • Power supply: 60 Hz suitability, transformer or converter, main switch rating
  • Compliance plan: field evaluation, guarding, electrical code
  • Written offer with Incoterm (preferably FCA), rigging and crating responsibilities
  • Freight quote door to door, insurance, ISPM 15 packaging
  • Customs broker's classification and estimated duties
  • Payment schedule tied to milestones

Finding machinery on Vermittco

Browse machinery and industrial equipment and related categories such as vehicles and materials. Listings show the seller's verification status and company details; use the inquiry to ask for the inspection material and the Incoterm, and set a search alert so you are informed when a matching machine is listed.

This guide gives a general overview and does not replace advice from a customs broker, engineer, tax adviser or lawyer. Tariffs and regulations change; verify the current rules before you buy.

Frequently asked questions

Can a European 50 Hz machine run in the United States?
Often yes, with a transformer and, where speeds matter, a frequency converter, or with drives that accept 60 Hz. Confirm with the manufacturer or an electrical engineer before buying, and plan the electrical work into the budget.
Is CE marking enough for the United States?
No. CE confirms conformity with EU rules. In the US, OSHA requirements, NFPA 79 and your insurer or local authority decide whether a field evaluation is needed. Budget for a compliance check after installation.
Which Incoterm should I choose for a used machine?
FCA is usually the most practical: the EU seller clears the machine for export and loads it, your forwarder handles the rest. EXW leaves the export declaration with you, which is difficult from outside the EU.
How much are import duties on used machinery?
That depends on the tariff classification of the machine and on current trade measures for goods from the European Union. Ask a customs broker for the current rate for your specific machine before you commit.
Do I pay European VAT?
Exports from the EU are VAT-exempt when the seller can prove the goods left the EU, which is the case when a forwarder ships them for you. If you collect the goods yourself, the seller may have to charge VAT and refund it against proof of export.

As of October 2026 · Publisher: Vermittco · All guides

Imprint · Privacy · Cookie settings · Terms