In short: An RFID hotel lock system consists of the escutcheon on the door, a mortise lock, the card encoder at reception and the software, often connected to the property management system. What matters most is the card technology (secure cards instead of outdated ones), a mortise lock that fits your doors, an emergency opening and that the door can always be opened from the inside without a card. On fire doors, only fit locks that are approved for that door.
Types
- Straight-bar (one-piece): a continuous escutcheon with reader and handle, the classic for hotel rooms.
- Split design: reader and handle separate, slimmer and more modern, often for new builds and renovations.
- Other types: locks for glass doors, lockers and cabinets, readers for lifts and side entrances, energy-saving switches with a card holder in the room.
Card technology
- 13.56 MHz (MIFARE and similar): the usual choice today. Older MIFARE Classic cards have been considered breakable for years; for new systems, cards with secure encryption such as MIFARE DESFire are the better choice.
- 125 kHz (e.g. T5577, EM): cheap but easy to copy, no longer advisable for hotel rooms.
- Other credentials: wristbands and key fobs for pools and spas, in some systems opening with a smartphone.
Ask which cards the lock can read, whether cards can be bought freely or are tied to the manufacturer, and how lost cards are reported and blocked.
Installation and hardware
- Mortise lock: backset, faceplate width and door thickness must match your existing doors, otherwise doors need to be milled or replaced.
- Power: usually batteries in the escutcheon (often four AA cells) with a low-battery warning; ask about the typical battery life.
- Emergency opening: a mechanical override key or an emergency power connection in case the batteries are empty.
- Escape route: the room door must always open from the inside with the handle and without a card.
- Fire doors: only use locks and hardware approved for that door; if in doubt, ask the door manufacturer or your fire safety officer.
Software, data and obligations
The system includes a card encoder at reception and software; many suppliers offer interfaces to common hotel property management systems so that cards are created at check-in. The locks record openings with time and card. These records relate to guests and staff and are therefore personal data under the GDPR: decide who may read them and how long they are kept. In the EU, locks with a built-in radio reader fall under the Radio Equipment Directive 2014/53/EU; ask for the EU declaration of conformity.
Price and ordering
Hotel locks are usually offered as a package: locks in the required quantity, encoder, software, cards and override keys. Compare offers with the same card technology and the same scope of delivery, and ask for a sample for a test door, spare parts, warranty and help with setup.
Hotel locks on Vermittco
You will find offers in the category Safes & locking technology: RFID hotel locks in straight-bar and split designs, mostly with prices on request (as of November 2026: more than 30 listings). The contracting party is always the respective seller; clarify card technology, mortise lock and scope of delivery directly in the listing.
This guide is a general overview. For fire doors and escape doors, building regulations and the door's approval are what counts.
Frequently asked questions
Which card technology is secure?
Will a new hotel lock fit my existing doors?
What happens when the batteries in the lock run out?
Can I replace locks on fire doors?
As of November 2026 · Publisher: Vermittco · All guides